![]() This IP address would be the same IP address that you would assign under Router Address in the screenshot above Look for "Router" and note the IP address of the router. Open System Preferences (the gear icon on the dock)Ĭlick Advanced at the lower right of the windowĬlick the TCP/IP tab at the top of the next window To test to see what IP address your main router.the ATT gateway.is using.Ĭonnect a Mac directly to one of the LAN ports on the ATT gateway In other words, the network router.your ATT gateway.is almost always automatically assigned the. Normally, the router will wind up with the 192.168.200. The settings under the Internet tab look reversed to me. Post back if you do not need the WiFi function to be active on the TC and you are not sure how to turn off the WiFi on the device.Īpple does not officially support Time Machine backups to a Time Capsule over a third party network, so you won't know how well.or if.things will work on your network until you try them out on your network. When you see the message of Setup Complete, click Done The setup "wizard" will set up everything for you automatically. Verify.Type in the same password again to confirm Password.Type in a password that will be used for the TC wireless and base station Later, we will turn off the WiFi if wishīase Station Name.Type in a name that you want to call the TC.Time Capsule.for example ![]() Network Name.Type in a name for the Time Capsule wireless. It will take a few seconds to analyze the network, then display a screen that looks like the example below, except that you will see a Time Capsule pictured. ![]() When you click on Time Capsule, that will get the setup "wizard" up and running. Look for a listing of New AirPort Base Station Hold in the reset button on the back of the TC for 7-8 seconds and releaseĪllow a full minute for the TC to restart to a slow, blinking amber light statusĬonnect an Ethernet cable from one of the LAN ports on the ATT gateway (there are probably 4 of them, choose any one that you wish) to the WAN "O" port on the TCĬlick on the WiFi menu at the top of your Mac's screen In order to avoid an endless "try this and try that" approach and make things tons easier, my advice would be to reset the TC back to default settings and then use Apple's setup "wizard" to set up the TC again.so that it will automatically pick up the correct settings that it needs to connect to the ATT gateway. Each Mac has a unique IPv4 IP address: 192.168.1.#Īt that point it looked like I finally got it right and so far no wireless issues.Each Mac was pointing to the correct ATT gateway router: 192.168.1.254.Each Mac was getting on the Internet through the gateway's wireless network.I went back to Airport Utility> Internet> DNS Servers and entered:Īfter that I was successful in confirming: Then I got NO DNS SERVER error when Airport Utility rebooted So I went back to Airport Utility> Internet> Connect Using: DHCP I entered IPv4 Address (guessed): 192.168.1.100Ī check suggest that two Macs checked were using IPv4 Address: 192.168.1.100 I entered the gateway Router Address: 192.168.1.254 (the one i use to log into the router) I went back to Airport Utility> Internet> Connect Using: Static Airport Utility> Network> Router Mode: OFF (bridge mode).Airport Utility> Wireless> Network Mode: OFF.It's my house mate's gateway and undisclosed login credentials so it was hard for me to dink around with it and figure it out, but HERE'S THE FIX SOLUTION WHAT WORKED when i finally got back into the TC this morning (to get the TC on the correct gateway router and IPv4 Address and DNS Servers):
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |